NEW 2024 TORO STX-26 STUMP GRINDER (MODEL 23208)
- Powered by a Kawasaki FX-730 V Twin Cylinder Engine
- INTELLI-SWEEP®: Automatically adjusts cutting head sweep speed based on the load on the wheel, so the engine runs efficiently during heavy loads.
- TRACK DESIGN:
• Allows for zero turn capabilities
• Provides a low center of gravity and large footprint increases stability on hillsides.
• Eliminates tire ruts and flat tires
• Operates in wet & soft ground conditions. Able to climb curbs
- TRACTION CONTROLS
Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions.
1) Left/right traction control (forward, reverse, turn)
2) Sweep, lift/lower and engagement of grinder head.
- FULL HYDRAULIC OPERATION:
• Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches
• No need to replace expensive cogged pulleys
• No worry of customers engaging grinder head at full throttle
• Eliminate shock loads to the engine by belts slipping or head stopping
- OFFSET CUTTING HEAD:
• Provides operator with excellent visibility to stump
• Hydraulically driven cutting head with Hydraulic flow directly to the cutter head for maximum performance. Design minimizes maintenance with no belts or pulleys to replace.
Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, and no adjusting tension - guaranteeing optimal performs time after time.
WE STOCK THE EQUIPMENT YOU NEED TO INCREASE YOUR PRODUCTIVITY, GIVE ONE OF OUR SPECIALISTS A CALL TODAY!!
We carry 12 individual brands of equipment. We have FOUR full-service locations with large yards full of new, used and rental equipment. – Burnsville, MN - Little Canada, MN, - Hudson, WI – St. Croix Falls, WI.
We serve a wide range of markets including construction, landscaping, grounds and property maintenance, agriculture, tree care, land clearing and erosion control. SALES - RENTAL - SERVICE - PARTS
Please visit our site at tristatebobcat
- Powered by a Kawasaki FX-730 V Twin Cylinder Engine
- INTELLI-SWEEP®: Automatically adjusts cutting head sweep speed based on the load on the wheel, so the engine runs efficiently during heavy loads.
- TRACK DESIGN:
• Allows for zero turn capabilities
• Provides a low center of gravity and large footprint increases stability on hillsides.
• Eliminates tire ruts and flat tires
• Operates in wet & soft ground conditions. Able to climb curbs
- TRACTION CONTROLS
Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions.
1) Left/right traction control (forward, reverse, turn)
2) Sweep, lift/lower and engagement of grinder head.
- FULL HYDRAULIC OPERATION:
• Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches
• No need to replace expensive cogged pulleys
• No worry of customers engaging grinder head at full throttle
• Eliminate shock loads to the engine by belts slipping or head stopping
- OFFSET CUTTING HEAD:
• Provides operator with excellent visibility to stump
• Hydraulically driven cutting head with Hydraulic flow directly to the cutter head for maximum performance. Design minimizes maintenance with no belts or pulleys to replace.
Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, and no adjusting tension - guaranteeing optimal performs time after time.
WE STOCK THE EQUIPMENT YOU NEED TO INCREASE YOUR PRODUCTIVITY, GIVE ONE OF OUR SPECIALISTS A CALL TODAY!!
We carry 12 individual brands of equipment. We have FOUR full-service locations with large yards full of new, used and rental equipment. – Burnsville, MN - Little Canada, MN, - Hudson, WI – St. Croix Falls, WI.
We serve a wide range of markets including construction, landscaping, grounds and property maintenance, agriculture, tree care, land clearing and erosion control. SALES - RENTAL - SERVICE - PARTS
Please visit our site at tristatebobcat
- $26,410.00
- Little Canada, MN
- New
- L083567
- 2024
- Toro
- STUMP GRINDER 23208
- 1
- Available